Even for the most creative home carpenters, power tools can be intimidating. They are sometimes not only complicated to use, but also can cause great harm if used improperly. Table saws definitely fall into this category, but they can become the power tool of choice for DIY enthusiasts.
However, if you know how to use a table saw for wood work at home, you will open up a world of projects. From the shelf to the sheath, the table saw can quickly complete long cutting operations that require accuracy and precision.
The table saw is placed on top of a table or bench and is a lightweight and economical choice for small projects. They are strong enough to cut boards such as plywood and oriented strand board, but their ability to cut any material wider than 20 feet is limited.
These table saws are heavy-duty and designed for large-scale operations. They are portable but powerful, capable of cutting boards wider than 24 inches. They are also high in weight and price, but they are a good choice for home carpentry jobs that require strong cuts on site.
Most home carpenters do not need a cabinet table saw, and its motor is installed in the cabinet under the table. This type of table saw is more powerful, heavier, and can expand the table to accommodate large width wood, so it is most common in workshops and industrial environments.
Hybrid table saws combine the best features of contractor and cabinet table saws. They are heavier than bench saws, but do not require the dedicated 220 volt circuit required for cabinet saws. Plan to buy a trolley to move it, because this type of table saw usually does not have rollers.
When choosing a table saw, you need to consider the required power, your preferred saw blade size, safety fence options, tearing capacity and dust collection capacity.
For light household woodworkers, a lower horsepower saw can work normally. If you plan to make heavy use, such as cutting hardwood, the higher horsepower allows you to use a longer table saw without overheating.
Most table saws are equipped with 10-inch or 12-inch blades. The 10-inch blade can cut up to 3.5 inches deep, and the 12-inch blade can cut up to 4 inches deep.
The safety fence keeps your incision straight. You can choose standard T-shaped fences, fine-tuning fences, telescopic fences and embedded fences. Each provides different benefits. For example, fine-tuned fences can achieve more precise cutting, while expandable fences can be opened for larger pieces of wood.
The tearing ability determines how much wood your table saw can cut. Smaller table saws may only hold 18 inches of lumber, while larger table saws can cut up to 60 inches of boards.
Some table saws provide dust collection systems. Choose this option if you work in a shared space or are sensitive to dust.
Before you begin, please read all the manufacturer’s instructions on assembly and safe operation of the table saw. When using a saw, always wear goggles and ear protection.
To make a rip cut, place the blade 1/4 inch higher than the width of the material to be cut. For example, if you want to cut a 1/2 inch plywood, set the blade to 3/4 inch.
Set the tear fence so that its inner edge is at the correct distance from the blade and the object you are cutting. The cut (the width of the blade) must be considered when measuring. Even if there are measurements on your table saw, please check it carefully with a more accurate tape measure.
Insert the saw and turn it on so that the saw blade reaches full speed before cutting. Make sure that the wood lies flat on the table saw, and then guide it slowly and steadily to the saw blade. Hold the wood snugly against the rip fence and use the push rod to guide the wood towards the end of the cut.
For narrow cross-sections, remove the anti-cracking fence. You will switch to the miter gauge that comes with the table saw to stabilize and stabilize the material while cutting it. For specific instructions on how to install and use the miter gauge, please refer to the instructions for the table saw.
As with your slit cutting, put on ear and eye protection before turning on the table saw. Let the blade reach full speed, then slowly but firmly guide the wood towards it. Before retrieving the cut wood, turn off the saw and allow the saw blade to stop rotating completely.
Dewalt’s rolling stand, safety features and simple operation make it the best choice for weekend warriors and DIY enthusiasts.
This powerful table saw is suitable for all your home woodworking projects. It is equipped with a four-horsepower motor and a gravity-rising wheel bracket for easy carrying.
Power, dust collection, ease of use: these features are just some of the features that make this RIDGID saw one of our favorite products​​​
This hybrid table saw has a dustproof port, strong power and a lightweight frame, seamlessly integrating the advantages of contractors and cabinet table saws, and is suitable for home woodworking.
Suzannah Kolbeck is the writer of BestReviews. BestReviews is a product review company whose mission is to help simplify your buying decisions and save you time and money.
BestReviews spends thousands of hours researching, analyzing and testing products, recommending the best choice for most consumers. If you purchase a product through one of our links, BestReviews and its newspaper partners may receive a commission.